Alcolin - Solderlene - 15g
Description
<p>Description ALCOLIN SOLDERLENE is a non-conductive sealer, which is resistant to water, steam, petrol and oil Features & Benefits </p><p>• Excellent chemical resistance – resists steam, petrol, oil and water </p><p>• Non brittle – suitable for flexible joints </p><p>• Metal coloured </p><p>• Excellent adhesion to metal Application </p><p>• Repairing holes and faulty seams on metals </p><p>• Stopping petrol leaks </p><p>• Fixing radiators </p><p>• Repairing kettles </p><p>• Seal welding spots </p><p>• Metallizing glass Adhesion ALCOLIN SOLDERLENE has good adhesion to most unpolished metals ALCOLIN SOLDERLENE will also adhere to coated and uncoated wood, stone, glass and paper Limitations </p><p>• Not suitable where a conductive adhesive is required </p><p>• Not suitable for bonding metals </p><p>• Will not adhere to some plastics such as polyethylene, polypropylene and Teflon Safety instructions ALCOLIN SOLDERLENE is flammable. </p><p>Keep away from sparks and flames. When working with product, it is advisable to wear gloves in order to avoid direct contact with the skin. If product comes in contact with skin or eyes, flush thoroughly and immediately with water. If irritation continues, seek medical attention Keep ALCOLIN SOLDERLENE out of reach of children! Refer to our material safety data sheets for further toxicological information and comprehensive handling instructions Directions for use i. Surface preparation The surface must be clean, dry and free from all loose materials, dust, dirt, oil and any other contaminants ii. Application </p><p>• Remove the cap and pierce the top of the tube, using the reverse side of the cap </p><p>• Apply ALCOLIN SOLDERLENE covering the surface area to be sealed. For repairing of leaks in metal kettles, we recommend repairing the outside of the kettle </p><p>• Do not disturb until set </p><p>• Replace cap and store in cool area </p><p>• Leave to set for approximately 8 hours before exposing to normal service conditions </p><p>Clean excess and applicators with acetone immediately </p><p>Storage stability ALCOLIN SOLDERLENE has a shelf life of at least 12 months if stored in a cool, dry place in its original moisture-tight container. </p><p>The glue should not be stored below 0°C or above 35°C If the material is kept beyond the recommended shelf life, it is not necessarily unusable, but a check should be performed to observe whether the product is still workable and uncured Product packaging 15g tubes</p>
